<?xml version="1.0"?>
<rss version="2.0">
<channel>
<title>ComicsPriceGuide.com Forums - General Comic Discussion - Toploaders - Messages</title>
<link>https://www.comicspriceguide.com/forum/messages.aspx?TopicID=15693</link>
<description>ComicsPriceGuide.com Forums - General Comic Discussion - Toploaders - Messages</description>
<language>en-us</language>
<docs>http://blogs.law.harvard.edu/tech/rss</docs>
<generator>Jitbit AspNetForum</generator>
<pubDate>Mon, 23 Nov 2020 10:35:36 GMT</pubDate>
<lastBuildDate>Mon, 23 Nov 2020 10:35:36 GMT</lastBuildDate>
<item>
<link>https://www.comicspriceguide.com/forum/messages.aspx?TopicID=15693</link>
<title>Message from Defiant1</title>
<description><![CDATA[<b>BasementComics</b> wrote:<br/><blockquote>I use them quite often for my more expensive books however I've also started using Mylite 2 and Full backs also.  The Mylites  will be a less expensive option (my comic stores sells them to me at $0.50 vs $0.15 for a regular back & board).  Amazon, Ebay or if you plan to buy in bulk, check out egerber.com as that will get you even a better deal.)</blockquote><br/><br/><br/><br/>Mylite 2's are the best option with an acid free backing board.<br/>I've got comics that I put in some thinner Mylites back in 1980 and they look and smell like they did the day they were purchased. <br/><br/>For long term storage, steer clear of polypropylene bags of any kind and definitely not polyethylene (which are rare these days). <br/><br/>Many manufacturer's lie and generically call their bags Mylar or "Archival". <br/><br/>They do it more out of ignorance than malice.<br/>You are safe with Mylite 2's, but they cost a little more.<br/>They also make any book look better for resale or flipping.]]></description>
<pubDate>Mon, 23 Nov 2020 10:35:36 GMT</pubDate>
</item>
<item>
<link>https://www.comicspriceguide.com/forum/messages.aspx?TopicID=15693</link>
<title>Message from glorkar</title>
<description><![CDATA[So I decided to buy some and see what they were like.<br/>I'm a little disappointed.<br/>My hope was that I'd be able to bag a book and slide it in.  In most cases, this was a no go.  The comic sits too loosely this way (unless it's a fairly thick book).  It could easily slide out and, while the edges / spine are protected, the book is still susceptible to bending in the middle.<br/>For this reason, I still had to use a board on most of my books.<br/>That said, it does protect a little better from accidental damage (for example, pressure damage when taking the comic out of a box).<br/><br/>I'm not sorry I bought them, but I'm also glad I only got 10 of them.  I'll use one on occasion for higher value books, but they definitely aren't worth it for the bulk of a collection.]]></description>
<pubDate>Fri, 20 Nov 2020 16:47:33 GMT</pubDate>
</item>
<item>
<link>https://www.comicspriceguide.com/forum/messages.aspx?TopicID=15693</link>
<title>Message from claydwilli</title>
<description><![CDATA[I've never used them for storage in general, like you I think a bag, board and box is enough. However, I do like to use them (and I like it when other people use them) when shipping a valuable comic.]]></description>
<pubDate>Mon, 09 Nov 2020 09:56:55 GMT</pubDate>
</item>
<item>
<link>https://www.comicspriceguide.com/forum/messages.aspx?TopicID=15693</link>
<title>Message from BasementComics</title>
<description><![CDATA[I use them quite often for my more expensive books however I've also started using Mylite 2 and Full backs also.  The Mylites  will be a less expensive option (my comic stores sells them to me at $0.50 vs $0.15 for a regular back & board).  Amazon, Ebay or if you plan to buy in bulk, check out egerber.com as that will get you even a better deal.)]]></description>
<pubDate>Sun, 08 Nov 2020 14:40:42 GMT</pubDate>
</item>
<item>
<link>https://www.comicspriceguide.com/forum/messages.aspx?TopicID=15693</link>
<title>Message from glorkar</title>
<description><![CDATA[Up until recently, I felt that toploaders were a strange thing and didn't really server much of a purpose.  Afterall, a sturdy bag and board basically does the same thing (keeps the comic clean and straight).<br/>I've been thinking about them again thought recently.<br/>I've got a handful of books that are worth a moderate amount of money ($20-$150).  Most of these books are either not worth grading, or I simply don't want / can't afford to have the others graded.<br/>I've started wondering if toploaders might actually be worth it for a slightly more rigid and durable protection method in this situation.<br/>Does anyone here use them?  Are they worth it?  Is it just a gimmick?]]></description>
<pubDate>Sun, 08 Nov 2020 13:14:21 GMT</pubDate>
</item>
</channel>
</rss>
